Mendota FV33-M-1111 Operations Instructions download pdf (Page 24)

2.) PULL

3.) ROTATE

4.) RELEASE

1.) INSERT

DOOR REMOVAL AND REPLACEMENT

CAUTION: Do not operate the appliance with glass removed, cracked or broken. Replacement of the glass should be

done by a licensed or qualified service person. Glass latch tool #HA-57-00743 is supplied with the unit.

To Unlatch Glass Frame Latches:

1. Insert Glass Latch Tool into hole in latch (two latches exist

at top of glass frame).

2. Pull Glass Latch Tool outward about 3/8”.

3. Rotate Glass Latch Tool 90 degrees.

4. Release Glass Latch Tool.

5. Remove Glass Latch Tool.

To Latch Glass Frame Latches, reverse steps 5 to 1,

above.

To Remove Glass Frame:

1. Rotate top edge of freed glass frame outward about 15

degrees.

2. Lift Glass Frame Up and Out.

To Install Glass Frame:

1. Align and insert tabs in side flanges of Glass Frame into Slots into the slot in the base plate.

2. Rotate Glass Frame upward until vertical.

3. Latch Glass in place per instructions above.

SLIDE TAB INTO

SLOT IN BASEPLATE

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

No comments

Mendota FV33-M-1111 Operations Instructions Page 24